New innovation and new XRAY patent â“ the XRAY Adjustable Rear Hub. CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions.
(click to enlarge)
The rear upright features composite bushings which have the hole positioned off-center, which can be inserted in the bottom of the block where the hinge pin is mounted. A set of four different bushings is available, each with a different eccentric hole position.
(click to enlarge)
By adjusting the bushings, the rear upright can be adjusted for height (up or down) and also for track width (in and out). One of the bushings has the 2° hole which enables outboard toe-in adjustment.
Right and left steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
(click to enlarge)
Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks.
Front upper suspension holder for REAR of front bulkhead. CNC-machined from highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging.
CNC-machined steering plate from 6mm highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging. This optional âś3Dâť steering plate has various steering linkage mounting positions for optimal bump steer adjustment (adjustment of front toe change during suspension movement). There are three different Ackermann settings possible. The steering plate is mounted with the upper level facing upwards as shown.
High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on both sides for an ultra-smooth surface finish that guarantees maximum braking efficiency. This set of exclusive brake pads is additionally hardened to increase the life and provide higher stiffness. A must have for serious racers. Set of 4.
CVD drive shaft made from world-renown HUDY Spring Steel™. The world's lightest and most exclusive 1/8 off-road drive train guarantees reduced rotating weight and increased performance.
(click to enlarge)
The drive shaft parts are ultra lightweight, strategically weight-reduced without compromising strength, and are manufactured from the premium high-quality top-secret Hudy Spring Steel™. The CVD drive shaft is rebuildable and all parts are available separately as spare parts.
Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted both in front and rear.
Set of new composite shims for off-road shocks. The new shims have sharp edges so they hold in the shock body more precisely and firmly. The set includes a thick and thin shim. The thick shim is mounted under the G-clip to hold it more firmly.
(click to enlarge)
The set includes a thick and thin shim. The thick shim is mounted under the G-clip to hold it more firmly.
These new 1.71g clutch shoes are slightly lighter than the stock aluminum shoes, allowing the engine to spool up a bit more before the shoes grab the flywheel. The end result is a clutch that will engage later in the powerband giving more rip out of the corners.
XRAYâ™s state-of-the-art engineering and perfectionism is evident in the attention to detail in this and all of its products. Do not compromise on quality and performance; use original and authentic XRAY products.